Ipx Service - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
For related commands, see display ipx interface.
Example
# Set the SAP update cycle to be 120 seconds.
[Quidway] ipx sap timer update 120

5.1.23 ipx service

Syntax
ipx service service-type name network.node socket hop hopcount [ preference
preference ]
undo ipx
View
System view
Parameter
service-type: Service Type.
name: Server Name.
network.node: Network ID and node value of the server. Herein, the network ID is 8
bit hexadecimal, 1~FFFFFFFD. The first "0" can be omitted while inputting it. Node
value is to identify a network node. 48 bits in length. 3 groups of 4 bit hexadecimal
separated by ".", e.g (xxxx.xxxx.xxxx).
socket: Service Socket.
hop hopcount: Number of hops to go through before reaching the server.
preference: The preference of service information.
preference: The value of the preference of service information, ranging from 0 to 255.
all: All servers.
Description
Using the ipx service command, you can add static service information to the service
information table. Using the undo ipx service command, you can cancle the service
information from the table.
By default, this function is disabled.
92
{ service-type [ name [
service
] ] [ preference
network.node
] } | all
preference