Apply Ip Precedence - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

6.1.5 apply ip precedence

Syntax
apply ip precedence precedence
undo apply ip precedence
View
Routing policy view
Parameter
precedence:
The IP packets have a total of 8 (0 to7) priorities:
routine
priority
immediate
flash
flash-override
critical
internet
network
Description
Using the apply ip precedence command, you can set the precedence for IP packets.
Using the undo apply ip precedence command, you can cancel the preset packet
precedence.
By default, precedence is not configured for IP packets.
This command sets the apply sub-statement of the policy, that is, sets precedence for
the matched IP packets.
For related commands, see apply interface, apply ip next-hop, apply default
interface, apply ip default next-hop.
Example
[3Com-route-policy] apply ip precedence critical
134
Priority of packets.
0
1
2
3
4
5
6
7