Ip Count Interior-Threshold - 3Com 3C13618 Command Reference Manual

Parameter
None
Description
Using the ip count inbound-packets command, you can configure IP Count to make
statistics on the input packets on the current interface. Using the undo ip count
inbound-packets command, you can disable IP Count to make statistics on the input
packets on the current interface.
By default, IP Count is disabled to make statistics on the input packets.
Using the ip count inbound-packets command on an interface can enable IP Count
to make statistics on the input packets on the interface. The information of a packet
will be retained either in Exterior-List or in Interior-List, depending on whether the
packet matches any IP Count list.
Example
# Set IP Count to make statistics on the packets received on the interface Ethernet0.
[Quidway-Ethernet0]ip count inbound-packets

4.1.9 ip count interior-threshold

Syntax
ip count interior-threshold number
undo ip count interior-threshold
View
System view
Parameter
number: Set the number of the data items that do not comply with the rules, in the
range from 0 to 16384. By default, it is 512.
Description
Using the ip count interior-threshold command, you can configure the maximum
number of the statistics items that comply with the rule. Using the undo ip count
interior-threshold command, you can restore the default maximum number of the
statistics items that comply with the rule.
Network Protocol
69