Ip Count Exterior-Threshold; Ip Count Firewall-Denied - 3Com 3C13618 Command Reference Manual

This command can be used for enabling or disabling IP Count to make statistics on
packets.
Example
# Enable IP Count.
[Quidway]ip count enable

4.1.6 ip count exterior-threshold

Syntax
ip count exterior-threshold number
undo ip count exterior-threshold
View
System view
Parameter
number: Set the number of the data items that do not comply with the rules, in the
range from 0 to 8192.
Description
Using the ip count exterior-threshold command, you can configure the maximum
number of the statistics items that do not comply with the rules. Using the undo ip
count exterior-threshold command, you can restore the default value.
Example
# Set the maximum number of count entries that can be created in Exterior-List to
100.
[Quidway]ip count exterior-threshold 100
# Set the maximum number of count entries that can be created in Exterior-List to 0,
the default value.
[Quidway]undo ip count exterior-threshold

4.1.7 ip count firewall-denied

Syntax
ip count firewall-denied [ inbound-packets | outbound-packets ]
Network Protocol
67