Display Encrypt-Card Ipsec Sa All - 3Com 3C13618 Command Reference Manual

3Com Command Reference Guide — V1.00
packet debug switch :
sa
misc
Total Statistics
Total packets send to card
Total packets receive from card :
Total bytes send to card
Total bytes receive from card
Max dropped packets per second
Statistics during last second :
Packets send to card
Packets receive from card
Bytes send to card
Bytes receive from card
Dropped packets
Card address
Previous valid card
Next valid card

4.1.5 display encrypt-card ipsec sa all

Syntax
display encrypt-card ipsec sa all [ slot-id ]
View
All views
Parameter
slot-id: The ID of the slot where the crypto card is located. The value range is
determined by the number of the slots on the router. If no value is input, the operation
will be implemented on all the crypto cards.
Description
Using the display encrypt-card ipsec sa all command, you can view all SA
information on the crypto card.
This command is applicable to crypto cards.
The displayed information includes proposal information, local address, remote
address, SA lifetime, SPI, and slot number of the crypto card.
46
off
debug switch : off
debug switch : off
:
: 0x00d76d74
: 0x00d76d74
: 0x00d76d74
: 0
0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0