3Com Router Command Reference Guide — V1.00
Description
Using the display ipx statistics command, you can view the number of packets the
IPX module receives and sends.
The output of the command helps the user to perform IPX flow statistics and fault
diagnosis.
Example
[Quidway] display ipx statistics
Recv:
0 total, 0 droped
Sent:
Type 20: 0 received, 0 matched, 0 discarded (tc>=8)
RIP:
0 RIP advertisements received, 0 sent 1 routes
SAP:
Forward: 0 need forwarding, 0 success
Echo:
0 requests received, 0 replies sent
Total:
5.1.6 ipx default-route
Syntax
ipx default-route
undo ipx default-route
View
System view
78
0 checksum errors, 0 bad hop count
0 discarded(hop=16), 0 encapsulation failed
0 packets pitched, 0 local destination
0 broadcast, 0 forward, 0 echo
0 total, 0 broadcast
0 forwarded, 0 echo
0 sent, 0 successfully sent, 0 encapsulation failed
0 RIP requests, 0 RIP replies, 1 RIP requests sent
0 SAP get nearest requests, 0 SAP get nearest replies
0 SAP requests, 0 SAP replies, 1 SAP requests sent
0 SAP advertisements received, 0 sent 1 servers
0 no route, 0 encapsulation failed
0 requests sent, 0 replies received
0 no route
412 bytes received, 576 bytes sent