Ppp Timer Negotiate - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

1.1.17 ppp timer negotiate

Syntax
ppp timer negotiate seconds
undo ppp timer negotiate
View
Interface view
Parameter
seconds: negotiation timeout in second. By default, the seconds is 3 seconds.
Description
Using the ppp timer negotiate command, you can configure the PPP negotiation
timeout. Using the undo ppp timer negotiate command, you can restore to the default
value.
During PPP negotiation, if no acknowledgement is received from the remote end within
this time range, PPP will retransmit the packets that have been previously transmitted.
For related commands, see link-protocol ppp.
Example
# Set the PPP negotiation timeout to 10 seconds.
[3Com-Serial0]ppp negotiate timeout 10
1.1.18 virtualbaudrate
Syntax
virtualbaudrate baudrate
undo virtualbaudrate
View
Interface view
Parameter
baudrate: Virtual baudrate on the interface ranging 0 to 4294967295 in bps. 0 indicates
that virtual baudrate is not used, the same as the undo virtualbaudrate command in
function.
20