Display Pim Neighbor - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
PIM information of interface Ethernet1:
IP address of the interface is 20.20.20.20
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
Total 1 PIM neighbor on interface
PIM DR(designated router) is 20.20.20.20
PIM information of interface LoopBack0:
IP address of the interface is 30.30.30.30
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
Total 0 PIM neighbor on interface
PIM DR(designated router) is 30.30.30.30
PIM information of interface LoopBack1:
IP address of the interface is 40.40.40.40
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
Total 0 PIM neighbor on interface
PIM DR(designated router) is 40.40.40.40

2.1.12 display pim neighbor

Syntax
display pim neighbor [ interface type number ]
View
All views
Parameter
type: Interface type
number: Interface number.
Description
Using the display pim neighbor command, you can view PIM neighbor
information found by router interface.
18