Snmp-Agent Sys-Info Version - 3Com 3C13618 Command Reference Manual

Parameter
string: Describe the system location, which comprises printable characters of 1 to 50
bytes (ASCII code is in the range of 32 to 127 bytes). The default for string is "Beijing
China".
Description
Using the snmp-agent sys-info location command, you can configure the system
information about the location of the device. Using the undo snmp-agent sys-info
location command, you can restore the default system location information.
You should correctly configure the system location, so that it can be used to locate the
failed equipment in case that faults occur on the network.
One and more spaces are allowed in the system location string. If multiple,
continuous spaces are input, the system will regard it as one space.
"?" is not allowed in the system location string.
For related commands, see snmp-agent , snmp-agent sys-info contact, display
snmp-agent sys-info location.
Example
# Set "Marlborough" as system location information.
[3Com] snmp-agent sys-info location Marlborough
# Restore the default system location information.
[3Com] undo snmp-agent sys-info location

3.1.18 snmp-agent sys-info version

Syntax
snmp-agent sys-info version { v1 | v2c | v3 | all }
undo snmp-agent sys-info version { v1 | v2c | v3 | all }
View
System view
Parameter
v1: Enable SNMPv1 operations.
v2c: Enable SNMPv2c operations.
System Management
55