Physical-Mode; Reverse-Rts - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00

3.1.15 physical-mode

Syntax
physical-mode { sync | async }
View
Serial interface view
Parameter
sync: Set the sync/async serial interface to work in synchronous mode.
async: Set the sync/async serial interface to work in asynchronous mode.
Description
Using the physical-mode command, you can configure the working mode of the
synchronous/asynchronous serial interface.
By default, working mode is sync for the synchronous/asynchronous serial interface.
Example
# Set the synchronous/asynchronous serial interface to work as an asynchronous
serial interface.
[3Com-Serial0]physical-mode async

3.1.16 reverse-rts

Syntax
reverse-rts
undo reverse-rts
View
Synchronous serial interface view
Parameter
None
30