Display X25 Vc - 3Com 3C13618 Command Reference Manual

Description
Using the display X25 template command, you can view attributes configured in an
X25 template.
For related commands, see fr x25 template.
Example
# Display all the X.25 templates.
[3Com]display X25 template
template
X25 , address
Defaults: idle VC timeout 0
input/output window size 2/2, packet size 128/128
Timers: T0 180000, T1
Channels: Incomming-only 20-30, Two-way 40-50, Outgoing-only disable
LAPB, modulo
T1 2000, T2

5.1.10 display x25 vc

Syntax
display x25 vc [ lci ]
View
All views
Parameter
lci: logic channel number.
Description
Using the display x25 vc command, you can view information about the X.25 virtual
circuit.
If no logic channel number is specified, all the virtual circuits will be displayed.
SVC (switched virtual circuit) is set up temporarily by X.25 through call connection
when data transmission is required. PVC is configured manually, and exists regardless
of the data transmission requirement. When the router works in X.25 switched mode,
virtual circuits will be set up for transmission of the switched data.
For related commands, see x25 pvc, x25 switch pvc, x25 xot pvc, x25 fr pvc.
Example
# Display the information of X.25 virtual circuit.
[3Com]display x25 vc
123
123 modulo
200000, T2
8, window-size
1000, T3 0
8
180000, T3
7, max-frame 1056, retry
Link Layer Protocol
180000
10
49