Ifquelen Arp - 3Com 3C13618 Command Reference Manual

Parameter
None
Description
Using the icmp redirect send command, you can enable a router to receive
redirected routes. Using the undo icmp redirect send command, you can disable a
router to receive redirected routes.
By default, forwarding redirected routes is disabled.
This command is used to enable a router to receive redirected routes.
Example
# Display how to enable a router to receive redirected routes.
[Quidway] icmp redirect send

3.1.3 ifquelen arp

Syntax
ifquelen arp queue-length
View
System view
Parameter
queue-length: Ranging 0 to 1000 bytes. The default queue length is 75 bytes.
Description
Using the ifquelen arp command, you can configure the queue length of the arp
packets at the interface.
Configuring the ARP queue length may affect the running efficiency at the Ethernet
interface. Therefore you should configure it under the guidance of the technical
support engineer.
Example
# Configure the ARP queue length to be 70.
[Quidway] ifquelen arp 70
Network Protocol
51