Debugging Dlsw - 3Com 3C13618 Command Reference Manual

3Com Router Command Reference Guide — V1.00
undo bridge-set bridge-set-number
View
Serial Interface view
Parameter
bridge-set-number: Bridge set number for bridging, ranging 1 to 63.
Description
Using the bridge-set (synchronous interface view) command, you can link DLSw
to the synchronous interface. Using the undo bridge-set (synchronous interface
view) command, you can disable the link.
By default, no synchronous interface is added to the bridge set .
Add an Ethernet interface to DLSw bridge set, then the LLC2 frames can be
transmitted to the peer entity at the far end through the corresponding TCP
corresponding channel.
Example
None

6.1.3 debugging dlsw

Syntax
debugging dlsw [ circuit | core |event | packet | tcp ]
View
All views
Parameter
circuit: Enable the DLSw circuit, open the debugging.
core: Enable the DLSw status machine debugging .
event: Enable the DLSw abnormal events debugging.
packet: Enable the DLSw messages debugging.
tcp: Enable the DLSw peer entity debugging.
98