Displaying And Debugging Dlsw; Dlsw Configuration Examples; Configuring Lan-To-Lan Dlsw - 3Com MSR 50 Series Configuration Manual

Displaying and
Debugging DLSw
DLSw Configuration
Examples
Configuring LAN-to-LAN
DLSw
To do...
Display the capabilities
exchange information
Display the information of a
virtual circuit or all virtual
circuits
Display the information of a
remote peer or all remote peers
Display the reachability
information list of DLSw
Display LLC2 statistics
information
Reset the TCP connection(s)
between the DLSw router and a
remote peer or all remote peers
Clear the information of a
virtual circuit or all virtual
circuits
Clear the reachability
information list of DLSw
Network requirements
As illustrated in Figure
DLSw on Router A and Router B to enable communication between an IBM host
with an SNA host over the Internet.
Network diagram
Figure 36 Network diagram for LAN-to-LAN DLSw configuration
Router A
1.1.1 .1/24
Eth1/0
LAN
LLC2
IBM AS/400
Use the command...
display dlsw information
[ ip-address | local ]
display dlsw circuits [circuit-Id ]
[ verbose ]
display dlsw remote
[ ip-address ]
display dlsw reachable-cache
display llc2 [ circuit circuit-id ]
reset dlsw tcp [ ip-address ]
reset dlsw circuits [ circuit-id ]
reset dlsw reachable-cache
36, DLSw works in a LAN-LAN environment. Configure
Internet

Displaying and Debugging DLSw

Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in user view
Available in user view
Available in user view
Router B
2.2.2.2/24
Eth1/0
LAN
LLC2
Host
225