HP-IB ommand Reference for Service
Some of the service menu keys have equivalent remote HP-IB commands. he analyzer uses
the SCPI programming language. For more information about SCPI and HP-IB, refer to the
\HP-IB Programming" section of the
listed in the following sections.
Syntax Summary
he following conventions are used when SCPI commands are being described:
<
Angle brackets (
he denition of the variable is usually explained in the accompanying text.
Square brackets ([ ]) are used to enclose implied or optional parameters within a command or
query.
UPPER/lower case characters are used to indicate the short form (upper-case) of a given
mnemonic. he remaining (lower-case) letters are the rest of the long form mnemonic. Either
the short form or the long form may be used.
Softkey SCPI Commands
his section lists the service menu keys in the order they appear on the menu map. See Figure
5-1. Each softkey is shown with its corresponding short-form SCPI command.
Some SCPI commands do not correspond directly to a softkey. hese are listed in the
alphabetical command summary in able 5-7, which also lists the long form of each SCPI
command.
Keystrokes
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
elect elf-Test
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
elect Adjustment
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Execute Test
FFFFFFFFFFFFFFFFFFFFFFFF
top Test
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Meas Cal ON off
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
tore CC to Disk
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
tore CC to EPROM
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Load CC from Disk
Programming Guide
) are used to enclose required parameters within a command or query.
Table 5-5. Softkey SCPI Commands
Tests and Adjustments Menu
Meas Cal Options Menu
Update Corr Const Menu
. Service-related SCPI commands are
SCPI Command
TE T: EL <num>
TE T: EL <num>
TE T: TAT RUN
TE T: TAT TOP
EN [1|2]:CORR[: TAT] <ON|1|OFF|0>
DIAG:CCON: TOR:DI K
DIAG:CCON: TOR:EEPR
DIAG:CCON:LOAD
Serv ce Related Menus
5-13