Ascii File Commands; Ascdown Command - Agilent Technologies HP 1660E Series User Manual

Logic analyzers

Table of Contents

Using the Pattern Generator

ASCII File Commands

In addition to the unique ASCII file commands described here, you may

want to include some standard FORMat commands in the ASCII file,

such as those that are used to specify the clock or output mode.

The only FORMat commands that are permitted are FORMat: MODe,

CLOCk, and DELay. Refer to the command descriptions in this chapter

for the syntax of these commands.

Note that there is no section header prefix for these ASCII file

command strings.

Refer to the example programs at the end of this chapter for usage

examples of the various commands described in this chapter.

The ASCDown command is used to signal the start of an ASCII file load.

It causes the current pattern generator label and sequence structures

to be cleared and reset to a default state.

The ASCDown command must precede any label definitions and the

data portion of an ASCII file load.