Meas Setup; Average/Hold Num - Agilent Technologies X Series Manual

Waveform Measurement

Meas Setup

Meas Setup
Displays the setup menu keys that enable you to control the parameters for the current measurement.
Key Path
Initial S/W Revision

Average/Hold Num

Sets the number of sweeps (average counts) that are averaged. After the specified number of sweeps, the
averaging mode (terminal control) setting determines the averaging action.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Min
Max
Initial S/W Revision
Modified at S/W Revision
318
Front-panel key
Prior to A.02.00
Meas Setup
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
[:SENSe]:WAVeform:AVERage:COUNt <integer>
[:SENSe]:WAVeform:AVERage:COUNt?
[:SENSe]:WAVeform:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:WAVeform:AVERage[:STATe]?
WAV:AVER:COUN 1001
WAV:AVER:COUN?
WAV:AVER ON
WAV:AVER?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
10
OFF
Saved in instrument state.
1
20001
Prior to A.02.00
A.03.00