Dlp-H103 Refresh Ethernet Pm Counts At A Different Time Interval; Dlp-H104 View Ether Ports And Pos Ports History Pm Parameters - Cisco ONS 15310-MA SDH Procedure Manual

Chapter 17 DLPs H100 to H199

DLP-H103 Refresh Ethernet PM Counts at a Different Time Interval

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
In node view, double-click a CE-Series or ML-Series Ethernet card. The card view appears.
Step 1
Click the Performance > Ether Ports tabs or the Performance > POS Ports tabs.
Step 2
Click the Utilization tab or the History tab.
Step 3
From the Interval drop-down list, choose one of four options:
Step 4
•
•
•
•
Click Refresh. The PM counts refresh with values based on the chosen time interval.
Step 5
Step 6 Return to your originating procedure (NTP).

DLP-H104 View Ether Ports and POS Ports History PM Parameters

Purpose
Tools/Equipment
Prerequisite Procedures
Required/As Needed
Onsite/Remote
Security Level
Step 1 In node view, double-click a CE-Series or an ML-Series Ethernet card. The card view appears.
Step 2 Click the Performance > Ether Ports > History tabs or the Performance > POS Ports > History tabs.
Click Refresh. Performance monitoring statistics appear for each port on the card.
Step 3
The PM parameter names appear on the left side of the window in the Param column. The parameter
numbers appear on the right side of the window in the Port # columns. For PM parameter definitions
refer to the "Performance Monitoring" chapter in the Cisco ONS 15310-MA SDH Reference Manual.
Step 4 View the Port # columns to see the current PM statistics for each port.
78-19416-01
1 min: This option displays the specified PM counts in one-minute time intervals.
15 min: This option displays the specified PM counts in fifteen-minute time intervals.
1 hour: This option displays the specified PM counts in one-hour time intervals.
1 day: This option displays the specified PM counts in one-day (24-hour) time intervals.
This task changes the window view to display specified PM counts in
time intervals depending on the interval option selected.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
This task enables you to view historical PM counts at selected time
intervals on a CE-Series or an ML-Series Ethernet card and port to
detect possible performance problems.
None
DLP-H29 Log into CTC, page 16-43
As needed
Onsite or remote
Retrieve or higher
Cisco ONS 15310-MA SDH Procedure Guide, Release 9.1 and Release 9.2
17-3