Ntp-B417 Upgrade Tl1 Cross-Connects To Ctc Circuits - Cisco ONS 15327 Procedure Manual

NTP-B417 Upgrade TL1 Cross-Connects to CTC Circuits

Figure 8-3
To upgrade the repaired circuit to a CTC circuit, complete the
Step 8
to CTC Circuits" procedure on page
Stop. You have completed this procedure.
NTP-B417 Upgrade TL1 Cross-Connects to CTC Circuits
Purpose
Tools/Equipment
Prerequisite Procedures TL1-created or CTC-created TL1-like cross-connects must exist on the
Required/As Needed
Onsite/Remote
Security Level
Log into an ONS 15327 node on the network where you want to upgrade the TL1-created or CTC-created
Step 1
TL1-like cross-connects. See the
are already logged in, continue with Step 2.
From the View menu, choose Go to Network View.
Step 2
Click the Circuits tab and choose one or more circuits with an UPGRADABLE status. These circuits
Step 3
contain a series of cross-connects that are linked together to form a circuit path. The cross-connects
might have been created with TL1 or with CTC using the TL1-like cross-connects option.
Step 4 From the Tools menu choose Circuits > Upgrade TL1 Cross-Connects to CTC Circuits.
On the Upgrade Circuits dialog box, click OK.
Step 5
The circuit status changes to ACTIVE.
Cisco ONS 15327 Procedure Guide, R4.0
8-14
Choosing the Cross-Connects Only Option
Create cross-connects only check box
Use this procedure to convert a series of cross-connects displayed as
UPGRADABLE in the CTC Circuits window to an ACTIVE CTC circuit.
None
network. See
cross-connect creation procedures.
As needed
Onsite or remote
Provisioning or higher
8-14.
Chapter 5, "Create Circuits and VT Tunnels"
"DLP-B60 Log into CTC" task on page 2-23
Chapter 8
"NTP-B417 Upgrade TL1 Cross-Connects
for instructions. If you
Manage Circuits
for
March 2003