Capture Bgp-Pdu Max-Buffer-Size - Dell C9000 Series Reference Manual

capture bgp-pdu max-buffer-size

Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
C9000 Series
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000
Defaults 40960000 bytes.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
7.5.1.0
Related
capture bgp-pdu neighbor
Commands
show capture bgp-pdu neighbor
IPv6 address on the E-Series.
Enter a size for the capture buffer.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced
— enables capture of an IPv4 BGP neighbor packet.
— displays BGP packet capture information for an
Border Gateway Protocol 441