Version
9.0.0.0
8.3.19.0
8.3.10.0
8.2.1.0
7.6.1.0
7.4.1.0
bfd enable (Interface)
Enable BFD on an interface.
C9000 Series
Syntax
bfd enable
Defaults
BFD is enabled on all interfaces when you enable BFD from CONFIGURATION mode.
Command Modes
INTERFACE
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.0.0.0
8.3.19.0
8.3.10.0
8.2.1.0
7.6.1.0
7.4.1.0
Description
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the C-Series.
Introduced on the E-Series.
Bidirectional Forwarding Detection (BFD)
399