Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Related
router bgp
Commands
distance bgp
Define an administrative distance for routes.
C9000 Series
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-distance
internal-distance
local-distance
Defaults
Command Modes
ROUTER BGP (conf-router_bgp_af)
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
— enters ROUTER mode on the switch.
Enter a number to assign to routes learned from a neighbor
external to the AS. The range is from 1 to 255. The default is 20.
Enter a number to assign to routes learned from a router within
the AS. The range is from 1 to 255. The default is 200.
Enter a number to assign to routes learned from networks listed
in the network command. The range is from 1 to 255. The
default is 200.
•
external-distance = 20
•
internal-distance = 200
•
local-distance = 200
Border Gateway Protocol
459