Aggregate-Address - Dell C9000 Series Reference Manual

aggregate-address

To minimize the number of entries in the routing table, summarize a range of prefixes.
C9000 Series
Syntax
aggregate-address ip-address mask [advertise-map map-name] [as-
set] [attribute-map map-name] [summary-only] [suppress-map map-
name]
Parameters
ip-address mask
advertise-map
map-name
as-set
attribute-map
map-name
summary-only
suppress-map
map-name
Defaults Not configured.
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
Enter the IP address and mask of the route to be the aggregate
address. Enter the IP address in dotted decimal format (A.B.C.D)
and mask in /prefix format (/x).
(OPTIONAL) Enter the keywords advertise-map then the
name of a configured route map to set filters for advertising an
aggregate route.
(OPTIONAL) Enter the keyword as-set to generate path
attribute information and include it in the aggregate.
AS_SET includes AS_PATH and community information from the
routes included in the aggregated route.
(OPTIONAL) Enter the keywords attribute-map then the
name of a configured route map to modify attributes of the
aggregate, excluding AS_PATH and NEXT_HOP attributes.
(OPTIONAL) Enter the keyword summary-only to advertise only
the aggregate address. Specific routes are not advertised.
(OPTIONAL) Enter the keywords suppress-map then the name
of a configured route map to identify which more-specific
routes in the aggregate are suppressed.
• ROUTER BGP ADDRESS FAMILY
• ROUTER BGP ADDRESS FAMILY IPv6
Description
Introduced on the C9010.
Border Gateway Protocol 413