Bgp Add-Path - Dell C9000 Series Reference Manual

bgp add-path

Allow the advertisement of multiple paths for the same address prefix without the new paths replacing any
previous ones.
C9000 Series
Syntax
bgp add-path [send | receive | both] path-count
Parameters
send
receive
both
path-count
Defaults Disabled
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.0
8.3.8.0
Related neighbor add-path
Commands path advertisements.
Enter the keyword send to indicate that the system sends
multiple paths to peers.
Enter the keyword receive to indicate that the system accepts
multiple paths from peers.
Enter the keyword both to indicate that the system sends and
accepts multiple paths from peers.
(OPTIONAL) Enter the number paths supported. The range is
from 2 to 64.
• ROUTER BGP
• ROUTER BGP-address-family
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— specifies that this neighbor/peer group can send/receive multiple
Border Gateway Protocol 415