show route-map
Display the current route map configurations.
C9000 Series
Syntax
show route-map [map-name]
Parameters
map-name
Command Modes
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.8.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Example
Dell#show route-map
route-map firpo, permit, sequence 10
Match clauses:
Set clauses:
Dell#
Related
route-map
Commands
(OPTIONAL) Enter the name of a configured route map, up to
140 characters.
•
EXEC
•
EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Increased the name string to accept up to 140 characters. Prior
to 7.8.1.0, names are up to 16 characters long.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
tag 34
— configures a route map.
Access Control Lists (ACL)
389