Neighbor Default-Originate - Dell C9000 Series Reference Manual

Version
7.8.1.0
7.7.1.0
Related bgp four-octet-as-support
Commands

neighbor default-originate

Inject the default route to a BGP peer or neighbor.
C9000 Series
Syntax
neighbor {ip-address | peer-group-name} default-originate [route-
map map-name]
To remove a default route, use the no neighbor {ip-address | peer-group-
name} default-originate command.
Parameters
ip-address
peer-group-name
route-map map-
name
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
Description
Introduced on the S-Series.
Introduced on the C-Series.
— enables 4-byte support for the BGP process.
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
Enter the name of the peer group to set the default route of all
routers in that peer group.
(OPTIONAL) Enter the keyword route-map then the name of a
configured route map.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Border Gateway Protocol 466