Bgp Confederation Identifier - Dell C9000 Series Reference Manual

Related
bgp client-to-client reflection
Commands
and clients.
neighbor route-reflector-client
show ip bgp cluster-list

bgp confederation identifier

Configure an identifier for a BGP confederation.
C9000 Series
Syntax
bgp confederation identifier as-number
To delete a BGP confederation identifier, use the no bgp confederation
identifier as-number command.
Parameters
as-number
Defaults Not configured.
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
— enables route reflection between the route reflector
— configures a route reflector and clients.
— views paths with a cluster ID.
Enter the AS number. The range is from 0 to 65535 (2 byte),
from 1 to 4294967295 (4 byte), or from 0.1 to 65535.65535
(dotted format).
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series. Added support for the 4-byte
format
Border Gateway Protocol 424