Debug Ip Bgp Soft-Reconfiguration - Dell C9000 Series Reference Manual

Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.8(0.0)
9.7(0.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.8.1.0
7.7.1.0
Usage Information To remove all configured debug commands for BGP, enter the no debug ip bgp
command.

debug ip bgp soft-reconfiguration

Enable soft-reconfiguration debug.
C9000 Series
Syntax
debug ip bgp [vrf vrf-name] [A.B.C.D | X:X:X:X::X | peer-group-
name] soft-reconfiguration
To disable, use the debug ip bgp [vrf vrf-name] [A.B.C.D | X:X:X:X::X |
peer-group-name] soft-reconfiguration command.
Parameters
vrf vrf-name
A.B.C.D
X:X:X:X::X
Description
Introduced on the C9010.
Introduced on the S3048–ON and S4048–ON.
Added ipv6 support.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
(OPTIONAL) Enter the keyword vrf followed by the name of the
VRF to enable soft-reconfiguration debugging on that VRF.
(OPTIONAL) Enter the IPv4 address of the neighbor in dotted
decimal format.
(OPTIONAL) Enter an IPv6 address.
Border Gateway Protocol 454