Match Tag - Dell C9000 Series Reference Manual

The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Related
match interface
Commands
match ip address
match ip next-hop
match ip route-source
routers.
match metric

match tag

match tag
To redistribute only routes that match a specified tag value, configure a filter.
C9000 Series
Syntax
match tag tag-value
To remove a match, use the no match tag command.
Parameters
tag-value
Defaults Not configured.
Command Modes ROUTE-MAP
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— redistributes routes that match the next-hop interface.
— redistributes routes that match an IP address.
— redistributes routes that match the next-hop IP address.
— redistributes routes that match routes advertised by other
— redistributes routes that match a specific metric.
— redistributes routes that match a specific tag.
Enter a value as the tag on which to match. The range is from
zero (0) to 4294967295.
Access Control Lists (ACL) 372