Dell C9000 Series Reference Manual page 380

To remove a set level condition, use the no set level {backbone | level-1 |
level-1-2 | level-2 | stub-area} command.
Parameters
backbone
level-1
level-1-2
level-2
stub-area
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Related
set automatic-tag
Commands
set metric
set metric-type
set tag
Enter the keyword backbone to redistribute matched routes to
the OSPF backbone area (area 0.0.0.0).
Enter the keyword level-1 to redistribute matched routes to
IS-IS Level 1.
Enter the keyword level-1-2 to redistribute matched routes to
IS-IS Level 1 and Level 2.
Enter the keyword level-2 to redistribute matched routes to
IS-IS Level 2.
Enter the keyword stub to redistributed matched routes to
OSPF stub areas.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— computes the tag value of the route.
— specifies the metric value assigned to redistributed routes.
— specifies the metric type assigned to redistributed routes.
— specifies the tag assigned to redistributed routes.
Access Control Lists (ACL) 380