Set Local-Preference - Dell C9000 Series Reference Manual

set local-preference

To set the BGP LOCAL_PREF attribute for routers within the local autonomous system, configure a filter.
C9000 Series
Syntax
set local-preference value
To delete a BGP LOCAL_PREF attribute, use the no set local-preference
command.
Parameters
value
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.1.1.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage Information The set local-preference command changes the LOCAL_PREF attribute for
routes meeting the route map criteria. To change the LOCAL_PREF for all routes, use
the bgp default local-preference command.
Related bgp default local-preference
Commands routes.
Enter a number as the LOCAL_PREF attribute value. The range is
from 0 to 4294967295.
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the default LOCAL_PREF attribute for all
Access Control Lists (ACL) 381