Cleaning The Itb; Cleaning The Platen Glass - Canon 5119B001AA Basic Operation Manual

Cleaning the ITB

If dirt sticks to the transfer belt and results in a deterioration in
print quality, clean the transfer belt inside the machine.
Keys to be used for this operation
OK
1
Press [ ] (Menu).
2
Press [ ] or [ ] to select <Adjustment/
Maintenance>, and then press [OK].
Menu
Scan Settings
USB Direct Print Se
Printer Settings
Adjustment/Maintenan
3
Press [ ] or [ ] to select <Clean ITB>, and then
press [OK].
Adjustment/Maintenance
Black Text Processi. . .
Special Processing
Clean Fixing Unit
Clean ITB
4
Press [OK].
Cleaning starts. It takes approx. 51 seconds for MF8380Cdw and
approx. 83 seconds for MF8080Cw.
Clean ITB
Start
5
Press [ ] (Menu) to close the menu screen.
Menu
...

Cleaning the Platen Glass

Follow this procedure to clean the platen glass and under
surface of the feeder or the platen glass cover.
1
Turn OFF the power switch and disconnect the
power cord.
2
Open the feeder or the platen glass cover.
3
Clean the platen glass and the under surface of
the feeder or the platen glass cover.
(1) Clean the areas with a cloth dampened with water.
(2) Wipe the areas with a soft, dry cloth.
4
Close the feeder or the platen glass cover.
5
Connect the power cord and turn ON the power
switch.
8-3