Maintenance By The User; User Maintenance Items; Cleaning - Canon ImageRUNNER 1022iF Service Manual

1.2.4 Maintenance by the User

1.2.4.1 User Maintenance Items

/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
No.
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]

1.2.4.2 Cleaning

/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
The parts that should be cleaned by the customer to maintain the design performance and the cleaning method are described below.
The service engineer should instruct the customer to clean the machine at regular intervals (once a month).
1. Cleaning the Pressure plate/Platen guide
Clean the pressure plates [1] and platen guide [2] with a cloth dampened with water or neutral detergent and squeezed hard, and then wipe it with a dry soft cloth.
2. Cleaning the Copyboarg glass/Reading glass/Copyboard holder (jump board)
Clean the copyboard glass [1], reading glass [2] and copyboard holder (jump board) [3] with a cloth dampened with water or neutral detergent and squeezed hard,
and then wipe them with a dry soft cloth.
3. Cleaning the Fixing pressure roller
If black streaks are seen on the printed paper, the fixing pressure roller can be dirty. If black streaks are seen on the printed paper, clean the fixing pressure roller
in the user mode. Be sure to clean the fixing pressure roller after replacing the toner bottle.
Item
Pressure plate/platen guide cleaning
Copyboard glass/reading glass cleaning/copyboard
holder (jump board) cleaning
Fixing pressure roller cleaning
Transfer roller cleaning
ADF roller cleaning
Exterior cleaning
Toner cartridge replacement
Toner bottle replacement
[2]
[2]
T-1-10
Maintenance cycle
As required
As required
As required
As required
As required
As required
When the message appears
When the message appears
[1]
F-1-12
[3]
[1]
F-1-13
Chapter 1
0013-1257
0013-1258
1-17