Key Pair And Server Certificate Settings; Network Port Change Procedure - Canon imageRUNNER ADVANCE C3325 Series Service Manual

2
Technical Explanation > MEAP > Settign Procedure > Preparation
CAUTION:
• To type text using the Web browser, use the characters compatible with the MEAP
device's touch panel display. The MEAP device may not properly recognize some
characters.
• When [Use SSL] is made available, it is necessary to set the key and the certificate
necessary for the SSL communication. Set the key and the certificate by SSL with
[SSL Settings] that exists in [Preferences] > [Network] > [TCP/IP Settings] > [SSL
Settings] on the device.
For details, refer to [Top] > [Security]> [MEAP Settings] > [Using the SSL] in the
e-Manual.
● Key pair and server certificate settings
To use SMS via SSL connection, it is required to specify a key pair and server certificate as
the key to be used.
Since a key (default key) that can be used for encrypted SSL communication is installed as
standard on this device, advance setting of the key pair and server certificate is not required.
To use an encryption key other than the default key, refer to the e-Manual to set the key pair
and server certificate required to perform encrypted SSL communication.
Note:
As for SMS, by setting a Default Key, encrypted SSL communication is always executed
regardless of the following setting: [Settings/Registration] > [Management Settings] >
[License/Other] > [MEAP Settings] > [SSL Settings]: ON/OFF.
2 Technical Explanation > MEAP > Settign Procedure > Preparation
● Network Port Change Procedure
The default port of the HTTP server used for MEAP and MEAP applications to provide the
servlet function is 8000, and the HTTPS server's default port is 8443. In the case that these
ports have already used by the customer who is to introduce this application, the MEAP
application cannot use the HTTP (or HTTPS) server(s).
By changing the following ports to use, however, the MEAP application can be used as well
as the existing system.
The procedure to set the HTTP/HTTPS server port is indicated below.
1) Set the port numbers in the following service mode.
To set the HTTP server port
• (Level2) COPIER > Option > NETWORK > MEAP-PN
To set the HTTPS (SSL) server port
• (Level2) COPIER > Option > NETWORK > MEAP-SSL
Note:
A port number can be any integer from 0 to 65535. To avoid port numbers that are
frequently used, do not use any integer from 0 to 1023.
Server Setting value
HTTP Server 1024 to 65535
HTTPS Server 1024 to 65535
Note:
• If Print Server is connected, do not specify port 8080.
If port 8080 is specified, it is not possible to access the remote UI of the device where the
MEAP authentication application is running. (Port 8080 is reserved to allow the PS Print
Server Unit to redirect to the device.)
• As for port on HTTPS server, it only applies to the device that supports SSL function.
2) Restart the device if the port number is set.
2-107
Default value / Value after RAM clear
8000
8443
T-2-90
2-107