003-955 Documents Size Exchange Rap; 003-956 Document Size Unknown Error Rap - Xerox workcentre 5335 series Service Manual

003-955 Documents Size Exchange RAP

Document size change error (MixMode). When loading a document with Mixed Size Originals
prohibited, a document of different size/orientation from the initial document was detected.
Only Image Overlay has the function that inhibits different sizes during document added.
Initial Actions
Check the document size/orientation and repeat the operation.
Procedure
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - reload Software
• Replace the DADF PWB (PL 51.2).
• If the problem persists, replace the IIT PWB (Switch the EEPROM)
Initial Issue
WorkCentre 5335 Family Service Documentation

003-956 Document Size Unknown Error RAP

Document size undefined error (Only APS is selected for the function requiring document size
setting). Undefined document size was detected when Platen is selected and only APS
requires document size selection.
Procedure
1. Enter a document size from the Panel or select a tray.
2. If powering OFF then ON does not resolve the problem, perform the following:
3. Check the connection between the IIT PWB and ESS, MCU all PWBs connected to them
(RAM, Firmware module, EEPROM)
4. Check the sw version of the controller sw - reload Software
(GP 16) 5. DADF APS Sensors 1-3:
6. Replace IIT PWB (Switch the EEPROM)
(PL 1.6).mm 7. Replace ESS PWB
07/2011
2-53
BUS Updated 12/2011
(GP
Component Control [005-218/219/220]
(PL 1.6).
(PL 35.2).
16)
(PL 51.17)
Status Indicator RAPs
003-955, 003-956