Table of Contents
Advertisement
003-341 IISS-ESS Communication 22 RAP
BSD-ON:
BSD 3.3 - ESS-IIT Communication
BSD-ON:
BSD 16.1 - ESS
A parameter transmission error during sending occurred.
Procedure
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the IIT, Control Panel, ESS, MCU all PWBs connected to them
(RAM, Firmware module, EEPROM)
•
Reload Software
(GP
16)
•
Replace IIT PWB (Switch the EEPROM)
•
If the problem persists, replace the ESS PWB
original ESS PWB and RAM DIMM.)
Initial Issue
WorkCentre 5335 Family Service Documentation
(PL
1.6)
(PL
35.2). (If not fixed by this, reinstall the
BUS Updated 12/2011
003-342 IISS-ESS Communication 23 RAP
BSD-ON:
BSD 3.3 - ESS-IIT Communication
BSD-ON:
BSD 16.1 - ESS
The driver detected an incorrect receive parameter argument from the application.
Procedure
•
Ensure that the customer is programming a job within the parameters of the machine uti-
lizing the UI.
•
Disconnect then reconnect the IIT, Control Panel, ESS, MCU all PWBs connected to them
(RAM, Firmware module, EEPROM)
•
Reload Software
(GP
16)
•
Replace IIT PWB (Switch the EEPROM)
•
If the problem persists, replace the ESS PWB
original ESS PWB and RAM DIMM.)
07/2011
2-35
(PL
1.6)
(PL
35.2). (If not fixed by this, reinstall the
Status Indicator RAPs
003-341, 003-342
Advertisement
Table of Contents
