003-702 Different Magnification For Side 1 And Side 2 Rap; 003-750 Book Duplex Documents Rap - Xerox workcentre 5335 series Service Manual

003-702 Different Magnification for Side 1 and Side 2 RAP

BSD-ON: BSD 3.3 - ESS-IIT Communication
BSD-ON: BSD 16.1 - ESS
In copying the two sides of the document simultaneously, the machine detected such settings
as apply different magnification ratios to the face (side 1) and the back (side 2) of the docu-
ment.
Procedure
• Change the settings so that the same magnification ratio can be applied to the face (side
1) and the back (side 2) of the document.
• Check the sw version of the controller sw - reload Software
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
Status Indicator RAPs
003-702, 003-750

003-750 Book Duplex Documents RAP

Book duplex is not set up with the correct sheet is stored with the current setting conditions.
Procedure
• Ask customer to check the Book Duplex setup menu.
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - reload Software
(GP 16)
07/2011
2-38
BUS Updated 12/2011
(GP 16)
Initial Issue
WorkCentre 5335 Family Service Documentation