002-500 Ui Error - Xerox workcentre 5335 series Service Manual

002-500 UI error

UI detection error during the startup of a CUI scan job:
1. The IIT is occupied
2. Fault has occurred
3. Service is not CUI
4. Upper limit number of sheets for the XSA
Procedure
After the Fault has been cleared, perform the same operation again. Or, check for any restric-
tions due to XSA.
Initial Issue
WorkCentre 5335 Family Service Documentation
07/2011
2-21
BUS Updated 12/2011
Status Indicator RAPs
002-500