No Power Rap - Xerox PHASER 3200MFP Service Manual

13 No Power RAP

Description
When system power is turned on the LCD panel does not come on.
Check and Cause
1. Check if the power input and SMPS output
are normal.
2. LCD panel does not come on but normal
start up sounds are heard.
3. The OPE unit display does not come on
and no start up sounds are heard.
Phaser 3200MFP / Workcentre PE220
1. Check and install new parts as necessary:
• Power supply cord
- PL 1.0 (Workcentre PE220)
- PL 1.1 (Phaser 3200)
• SMPS
- PL 1.0 (Workcentre PE220)
- PL 1.1 (Phaser 3200)
2. Check and install a new OPE unit,
3. Check and install a new Main PBA if neces-
sary:
- PL 1.0 (Workcentre PE220)
- PL 1.1 (Phaser 3200)
04/07
Status Indicator RAPs
Solution
PL 5.0
2-21