003-944 Image Repeat Count Rap - Xerox workcentre 5335 series Service Manual

A
Y N
Replace the DADF Tray Size 2 Sensor
Replace the DADF PWB (PL 51.2).
Replace the DADF PWB (PL 51.2).
Status Indicator RAPs
003-942, 003-944
(PL 51.10).
BUS Updated 12/2011

003-944 Image Repeat Count RAP

Incorrect image repeat count. Even one image cannot be pasted when "Set Repeated Count-
Auto" is specified for image repeat.
Procedure
• Ask customer to check the job setups (Change the image repeat count parameter and
repeat the operation.)
• Disconnect then reconnect the ESS, MCU all PWBs connected to them (RAM, Firmware
module, EEPROM)
• Check the sw version of the controller sw - reload Software
07/2011
2-50
(GP 16)
Initial Issue
WorkCentre 5335 Family Service Documentation