012-911 Stacker Lower Safety Warning Rap; 012-914 Stacker Tray Stapled Set Over Count Rap - Xerox workcentre 5335 series Service Manual

012-911 Stacker Lower Safety Warning RAP

The Height Alignment was not successful within 250msec when the Height Adjustment was
performed for output paper to the Stacker Tray (Tray lowering down) in the middle of a job.
Procedure
Remove all paper from the Stacker. If the problem continues, go to the
Status Indicator RAPs
012-911, 012-914

012-914 Stacker Tray Stapled Set Over Count RAP

The Staple Set Count of the Stacker Tray has exceeded 50 sets during the Staple Set Eject
operation.
Procedure
012-213 RAP. Remove all paper from the Stacker. If the problem continues, go to the
07/2011
2-130
BUS Updated 12/2011
012-161 RAP.
Initial Issue
WorkCentre 5335 Family Service Documentation