13 No Power RAP
Switch off the electricity to the machine. Disconnect the power cord from the customer supply
while performing tasks that do not need electricity. Electricity can cause death or injury. Moving
parts can cause injury.
Description
When system power is turned on the LCD panel does not come on.
Check and Cause
1. Check the power supply cord, PL 1.
Check the SMPS/HVPS output using Engine
Test Mode, GP 4.
2. LCD panel does not come on but normal
start up sounds are heard.
WorkCentre 3119
WARNING
1. Install new parts as necessary:
•
Power supply cord, PL 1
•
SMPS/HVPS, PL 1
•
Main PBA, PL 1
2. Install a new PBA sub-panel, PL 8.
07/06
Status Indicator RAPs
Solution
2-17