Table of Contents
Advertisement
005-135 DADF Side 2 Pre Registration Sensor On Jam RAP
BSD-ON:
BSD 5.1 - Document Setting
BSD-ON:
BSD 5.5 - Document Feed (2 of 2)
BSD-ON:
BSD 5.6 - Document Scan and Invert
After the Invert operation started (DADF Registration Motor On (CW)) at Invert, the DADF Pre
Registration Sensor did not turn ON within the specified time.
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
•
Transportation failure due to foreign substance in the document path
•
The surface of the roll for foreign substance
•
The surface of the roll for wear
•
Check the sw version of the controller sw - update if required.
•
DADF Registration Motor:
Component Control
•
Check the circuit between the DADF Pre Registration Sensor and the DADF PWB
•
DADF Pre Registration Sensor:
Component Control
•
DADF PWB failure.
(PL
51.2)
•
The Gate Solenoid
Component Control
•
Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release
Solenoid
(Component Control
[005-072]))
Status Indicator RAPs
005-135 , 005-136
[005-033]
(PL
51.5)
[005-206]
(PL
51.17)
[005-090] for operation failure
(PL
51.6).
BUS Updated 12/2011
005-136 DADF Side 2 Registration Sensor On Jam RAP
BSD-ON:
BSD 5.5 - Document Feed (2 of 2)
BSD-ON:
BSD 5.6 - Document Scan and Invert
After the DADF Pre Registration Sensor turned ON at Invert, the DADF Registration Sensor
did not turn ON within the specified time.
NOTE: When turning the power OFF, turn OFF the power switch first and then the main power
switch.
Procedure
Check the following:
•
Transportation failure due to foreign substance in the document path
•
The surface of the roll for foreign substance
•
The surface of the roll for wear
•
Check the sw version of the controller sw - update if required.
•
Check if the Exit Roll is nipping properly. (Including the operations of Exit Nip Release
Solenoid
(Component Control
•
Check the circuit between the DADF Pre Registration Sensor and the DADF PWB
•
DADF Pre Registration Sensor:
•
Check the circuit between the DADF Registration Sensor and the DADF PWB
•
DADF Registration Sensor:
Component Control
•
DADF Feed Motor:
Component Control
•
DADF PWB failure.
(PL
51.2)
07/2011
2-68
[005-072]))
(PL
51.6)
Component Control
[005-206]
(PL
51.17)
[005-110]
(PL
51.17)
[005-008]
(PL
51.5)
WorkCentre 5335 Family Service Documentation
Initial Issue
Advertisement
Table of Contents
