Ip Ssh Hostbased-Authentication - Dell S6100 Configuration Manual

ip ssh hostbased-authentication

Enable hostbased-authentication for the SSHv2 server.
Syntax ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the no ip ssh hostbased-authentication
enable command.
Parameters
enable
Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.10(0.0)
9.8(1.0)
9.8(0.0P5)
9.8(0.0P2)
9.7(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
pre-6.1.1.0
Usage Information
If you enable this command, clients can log in without a password prompt. This command provides two levels of
authentication:
•
•
Related Commands
•
•
1442 Security
Enter the keyword enable to enable hostbased-authentication for SSHv2 server.
Description
Introduced on the S6100-ON.
Introduced on the Z9100-ON.
Introduced on the S4048-ON.
Introduced on the S3048-ON.
Introduced on the S6000–ON.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
rhost-authentication is done with the file specified in the ip ssh rhostfile command.
checking client host-keys is done with the file specified in the ip ssh pub-key-file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file) to configure host-
based authentication.
ip ssh pub-key-file — public keys of trusted hosts from a file.
ip ssh rhostsfile — trusted hosts and users for rhost authentication.