Tacacs-Server Host; Tacacs-Server Key - Dell PowerConnect 8024 Cli Reference Manual

tacacs-server host

Use the tacacs-server host command in Global Configuration mode to configure a TACACS+
server. This command enters into the TACACS+ configuration mode. To delete the specified
hostname or IP address, use the no form of this command.
Syntax
tacacs-server host {
no tacacs-server host {
ip-address —
•
hostname — The hostname of the TACACS+ server. (Range: 1-255 characters).
•
Default Configuration
No TACACS+ host is specified.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple tacacs-server host commands can be used.
Example
The following example specifies a TACACS+ host.
console(config)#tacacs-server host 172.16.1.1
console(tacacs)#

tacacs-server key

Use the tacacs-server key command in Global Configuration mode to set the authentication
and encryption key for all TACACS+ communications between the switch and the TACACS+
daemon. To disable the key, use the no form of this command.
Syntax
tacacs-server key [ key-string ]
no tacacs-server key
key-string — Specifies the authentication and encryption key for all TACACS
•
communications between the switch and the TACACS+ server. This key must match the key
used on the TACACS+ daemon. (Range: 0–128 characters)
488
TACACS+ Commands
ip-address hostname
| }
ip-address hostname
|
The IP address of the TACACS+ server.
}