Bgp Log-Neighbor-Changes - Dell Z9500 Command Reference Manual

BGP graceful restart is active only when the neighbor becomes established.
Otherwise it is disabled. Graceful-restart applies to all neighbors with established
adjacency.

bgp log-neighbor-changes

Enable logging of BGP neighbor resets.
Z9500
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled
Command ROUTER BGP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.11.1
7.8.1.0
7.7.1.0
Usage
To view BGP neighbor resets, use the show logging command in EXEC mode.
Information
The bgp log-neighbor-changes command appears in the show config
command output.
Related show logging
Commands
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems.
Z9500
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Border Gateway Protocol
Description
Introduced on the Z9500.
Introduced on the Z9000.
Introduced on the S-Series.
Introduced on the C-Series.
— views logging settings and system messages logged to the system.
381