Display Logfile Summary - H3C S5120-SI Series Command Reference Manual

include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display logfile buffer command to display contents of the log file buffer.
Note that all contents in the log file buffer will be cleared after they are successfully saved into the log file
automatically or manually.
Examples
# Display the contents of the log file buffer.
<Sysname> display logfile buffer
%@27091414#Aug
Trap 1.3.6.1.6.3.1.1.5.4<linkUp>: Interface 983040 is Up, ifAdminStatus is 1, ifOperStatus
is 1
The rest is omitted here.

display logfile summary

Syntax
display logfile summary [ | { begin | exclude | include } regular-expression ]
View
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see CLI in the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case sensitive string of 1 to 256
characters.
Description
Use the display logfile summary command to display the configuration of the log file.
Examples
# Display the configuration of the log file.
<Sysname> display logfile summary
Log file is enabled.
Channel number : 9
7 08:04:02:470 2009 Sysname IFNET/4/INTERFACE UPDOWN:
1-8