Agilent M9210A Introduction; Related Documentation; Follow The Startup Sequence - Agilent Technologies M9210A Startup Manual

Agilent M9210A Introduction

The scope of this Startup Guide is to detail the processes of receiving and installing the Agilent M9210A PXI-H
10-bit Digitizing Scope, installing the required software, and verifying basic module operation. If you have any
questions after reviewing this information, please contact your local Agilent representative or contact us through
our website at www.agilent.com/find/assist

Related Documentation

This Startup Guide and the documentation listed below are on the CD
and at www.agilent.com/find/M9210A. Select Technical Support >
Manuals.
Help system for the Soft Front Panel
l
Help systems for the device drivers (IVI-C and IVI-COM, and
l
LabVIEW G)
Specifications (Data Sheet)
l

Follow the Startup Sequence

This Start-Up Guide is intended to lead the user through the four steps of product installation as summarized in the
diagram below. An optional fifth step shows how to perform a operational verification of the M9210A.
Closely follow the startup process flow in this document. Deviating from the sequence can cause
unpredictable system behavior, damage your system, and may cause personal injury.
Agilent M9210A PXI-H 10-bit Digitizing Scope Startup Guide
Step 1: Unpack and Inspect
Step 2: Verify Shipment
Step 3: Install Drivers and Software
Step 4: Install Modules
Related Documentation
7