10. Define The Setup For A Limit Table - Agilent Technologies ENA Series User Manual

Measurement Examples
Evaluating a Duplexer
Setup Description
Search/Tracking: ON
Moving Marker 1 to the peak in the pass band
In the example shown in Figure 14-15, the return loss (response value of Marker 1) is 13.80
dB.
Step 6. Turn on the marker table display.
Setup Description
Marker table display: ON
Figure 14-15 Analyzing Duplexer Parameters

10. Define the Setup for a Limit Table

Follow the steps below to make entries into the limit table.
Step 1. Define a limit table for Trace 1 (S
Setup Description
Activating Trace 1
296
*1. If you cannot move the marker to the desired peak, use
peak deviation and then execute the search again. (Example:
).
Key Operation
-
Peak Search Left
many times as necessary.)
Peak Excursion
Key Operation
).
13
Key Operation
- (Turn it )
Tracking ON
| (Press as
Search Right
*1
to change the
-
Peak Excursion
- (Turn it )
Marker Table ON
Chapter 14