Table of Contents
Advertisement
Table 5
External noise input port
Measurement accuracy
Table 6
Carrier Frequency
Range
RF Input (R port)
RF Input with Option 001 0 dBm to +30 dBm
Signal Input (L port)
Samples of this product have been type tested in accordance with the Agilent
N O T E
Environmental Test Manual and verified to be robust against the environmental stresses of
Storage, Transportation and End-use; those stresses include but are not limited to
temperature, humidity, shock, vibration, altitude and power line conditions. Test Methods
are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3.
Power requirements
The flexibility of the E5505A system configuration results in a significant
range of power requirements, depending on the type and number of
instruments in a system.
individual instruments so that you can determine the requirements of your
specific system. It also provides the maximum current drawn by an
E5505A system that contains one of each type of instrument listed in the
table.
Table 7
Component
System maximum
(one of each type of instrument below)
PC
Display (LCD)
N5500A test set (Opt. 001)
E5505A Installation Guide
Operating characteristics (continued)
Amplitude ranges
Low Frequency Inputs Options 001 & 201
50 kHz to 1.6 GHz
0 dBm to +23 dBm
+15 dBm to +23 dBm
Table 7
E5505A maximum AC power requirements
0.01 Hz to 100 MHz
±2 dB (<1.0 MHz offsets)
±4 dB (<100 MHz offsets)
High Frequency Inputs
1.2 GHz to 26 GHz
0 dBm to +5 dBm
0 dBm to +30 dBm
+7 dBm to +10 dBm
provides the maximum requirements for
115 VAC
27 A
9 A
1.2 A
3 A
1
General Information
Options 001
AM Noise
50 kHz to 26.5 GHz
N/A
0 dBm to +30 dBm
230 VAC
17 A
4.5 A
1.2 A
2 A
15
Advertisement
Table of Contents
